NVIDIA Jetson Nano 2.5 inch SATA SSD/HDD Shield T300 by Suptronics and Geekworm

NVIDIA Jetson Nano 2.5 inch SATA SSD/HDD Shield by Geekworm and Suptronics

We release a NVIDIA Jetson Nano 2.5 inch SATA SSD/HDD T300 V1.0 Storage Expansion Board, it is specifically designed for NVIDIA Jetson nano developer kit that supports up to 4TB 2.5-inch ssd/hard drives by Geekworm and Suptronics, it allows you to expand your storage with high-speed SSD / HDD drives on NVIDIA Jetson nano developer kit.


We also will release another support NVMe m.2 SSD expansion board T100 soon.

Please refer to:https://devtalk.nvidia.com/default/topic/1056800/jetson-nano/nvidia-jetson-nano-nvme-m-2-ssd-shield-t100-by-geekworm-and-suptronics/post/5358259

[About Power supply]
In fact, you can power directly Jetson nano only, thus T300 will be powered from USB 3.0. BUT you must use the high quality power adapter, this is very very important.

We recommend that you power Jetson nano and T300 via 1 female to 2 male DC cable.

[Matching Metal Case]


We prepare 3USD off discount coupon:NEW3 for you for this new arrival NVIDIA Jetson Nano 2.5 inch SATA SSD/HDD T300 V1.0 Storage Expansion Board;(Only can be used on Geekworm Official Site)

Geekworm Official Site:

Amazon US

That’s great! Thanks for sharing - I will add it to the wiki. Nice touch with the barrel jack power splitter and the USB3 bridge board.

How will the upcoming NVMe M.2 T100 expansion board connect to the Nano? Are you creating adapter to M.2 Key-E? That would also be very useful.


It’s USB to m.2 key M.

Thanks very much. I have added a new section to wiki for Storage Devices here: https://elinux.org/Jetson_Nano#Storage

Others may be interested in this JetsonHacks article that covers how to boot the rootfs from external drive: https://www.jetsonhacks.com/2019/04/25/jetson-nano-run-on-usb-drive/


We have just sell it on Amazon USA: https://www.amazon.com/dp/B07T9FQ293.

We prepair other several new product also, and I will upload it soon.

NVMe M.2 SSD shield is comes.
Please refer to: https://devtalk.nvidia.com/default/topic/1056800/jetson-nano/nvidia-jetson-nano-nvme-m-2-ssd-shield-by-geekworm-and-suptronics/

Very cool, do you have any plans to add GPIO expander board? (GrovePi+) ??

Hi, Temporarily no plan