I’m trying this simple pipeline: gst-launch-1.0 --gst-debug="*:2" videotestsrc ! nvoverlaysink overlay=5 It works fine if overlay is 1 or 2. But when I try 4 or 5, I got a lot of errors: 0:00:01.187001455 3085 0x7f8800eb80 ERROR omx gstomx.c:496:EventHandler:<nvoverlaysink-n…

But the valid range of “overlay” is only 0~5. Is there any chance it can be increased to 10 or 16? Hi, This is not possible due to hardware limitation. Each overlay here is actually a hardware window, or you could call it framebuffer. ref: TX1 TRM → ch24. Display controller.

nvoverlaysink reports "got error: Insufficient resources" if overlay is 4 or 5

Robotics & Edge Computing Jetson & Embedded Systems Jetson Nano

DaneLLL October 22, 2019, 2:55am 2

Hi,
It cannot be supported in nvoverlaysink. Please use nveglglessink.

Topic		Replies	Views
two nvoverlaysink problem on jetson nano Jetson Nano	6	1824	October 18, 2021
Using nvoverlaysink to overlay two input streams Jetson TX2	2	1198	October 18, 2021
Fail to layout 2 nvoverlaysink on one display Jetson TX2 gstreamer	2	347	October 18, 2021
GStreamer nvoverlaysink error Jetson AGX Xavier	6	853	October 18, 2021
About the issue of opening two nvoverlaysink Jetson TX1	9	3674	October 18, 2021
Nvoverlaysink bug or my mistake? Jetson Nano gstreamer	2	554	October 18, 2021
nvoverlaysink rendering Jetson TX2	9	3778	October 18, 2021
got error using nvhdmioverlaysink Jetson TX2	4	1339	October 18, 2021
Issue with nvoverlaysink for overlay 2 Jetson AGX Xavier	6	1598	October 18, 2021
Gstreamer h.263 problem Jetson TK1	2	1546	December 3, 2014

nvoverlaysink reports "got error: Insufficient resources" if overlay is 4 or 5

Related topics