Hello, I’m using a sensor imx297 on a Orin Nano, on the port CSI3. This is a MIPI sensor, single lane. The mclk is generated on the camera PCB side. The peak bandwidth is 1.2 Gbps. I already ran it successfully on the Xavier. I suspect a device tree configuration problem. I’m running with a custo…

Hi @JerryChang , I have a theory about what the problem is, but I would appreciate Nvidia confirmation. It looks to me that the CSI engine does not capture the image properly if the line length is not a multiple of 32 (at least for the RAW10 format - it may be a 64B alignment requirement). The ca…

Orin Nano: MIPI acquisition reports CHANSEL_NOMATCH

Robotics & Edge Computing Jetson & Embedded Systems Jetson Orin Nano

system Closed December 14, 2023, 10:05am 22

This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.

Topic		Replies	Views
vi2 channel error while streaming MT9M021 Jetson TX1	33	5438	October 18, 2021
Questions about MIPI recievement on TX2 side Jetson TX2	9	1197	October 18, 2021
Custom Carrier TX2 CSI Video problems Jetson TX2	19	1748	November 5, 2018
Custom driver for csi-2 raw bayer sensor. (Use ISP for format conversion) Jetson TX1	16	4879	October 18, 2021
IMX296 sensor driver for Jetson Nano 32.2 Jetson Nano	8	2727	October 2, 2019
Camera outputs to 1 buffer only Jetson TX1	59	5714	October 18, 2021
Camera driver Jetson Nano camera	21	2188	April 12, 2023
Porting AR0135 + DS90UB964 driver to Jetson TX2 (Chansel Fault?) Jetson TX2	27	9016	December 1, 2017
Meet NvBufSurfaceFromFd Failed when driving imx577 on Orin Nano Jetson Orin Nano camera	50	1635	August 2, 2023
Don't get stream from Onsemi AR0234 on CAM0 at Orin Nano Developer Kit. Get Error 0x10000000 at register NVCSI_PHY_1_CILA_INTR_0_STATUS_CILA_0 Jetson Orin Nano camera , kernel	16	1643	August 30, 2023

Orin Nano: MIPI acquisition reports CHANSEL_NOMATCH

Related topics