Orin nano upgrade to super will not complete

Robotics & Edge Computing Jetson & Embedded Systems Jetson Orin Nano
1

Here are the NON-working instructions.

If your Jetson Orin Developer Kit was previously running JetPack 6.0 or JetPack 6.1, execute the following command after the final login and reboot your device. This ensures that the MAXN performance mode becomes available on your system.

sudo rm -rf /etc/nvpmodel.conf

Reboot

Switch to MAXN mode

Note that the default power mode is “15W”. To switch to the new power mode and unlock the increased performance, refer below steps:

  1. Click on the current power mode (15W mode) by clicking the NVIDIA icon on the right side of the Ubuntu desktop’s top bar.
  2. Select Power Mode from the menu.
  3. Choose MAXN to enable maximum performance.

After completing these steps, the MAXN option is still not available in the drop down…

3

Hi,
This may not work properly. Please re-flash the Orin Nano developer kit to enable the mode.

5

This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.