Hi, We are designing a custom carrier board for Jetson Orin NX. We noted that the USB Recovery port is used FUSB301TMX IC, but this IC was out of stock everywhere. Our question is can we change to the FUSB303TMX for the USB Recovery port. Because the I2C address of FUSB301TMX and FUSB303TMX are …

Hi, Yes, you can manually build kernel image. Please refer to kernel section in developer guide: Kernel — Jetson Linux Developer Guide documentation

Hi, For enabling driver of the controller, please consult the vendor for help. The i2c address is different and please refer to our adaptation guide: Jetson Orin NX and Nano Series — Jetson Linux Developer Guide documentation to modify device tree. This part should be modified: 146 i2c@c…

Replace FUSB301TMX by FUSB303TMX

Robotics & Edge Computing Jetson Systems Jetson Orin NX

karoot January 25, 2024, 4:05am 4

I see a driver for HD3SS3220 on the Jetpack 5.1.2. Is it possible if we enable this driver and replace for FUSB301 ?

Topic		Replies	Views
Change FUSB301TMX to FUSB303TMX Jetson Orin Nano board-design	5	740	October 9, 2023
USB-C recovery circuit Jetson Orin NX hw	1	202	June 11, 2024
Jetson-AGX-ORIN add FUSB301 Jetson AGX Orin usb , board-design	7	533	August 5, 2024
USB port does not enumerate on Custom Carrier Board / BSP talking to wrong address Jetson Orin NX boot , kernel , ubuntu , usb , board-design	1	104	December 24, 2025
Assign I2C to USB-C Port Jetson Orin Nano usb , board-design	20	672	October 29, 2024
Add two FUSB301TMX adapters Jetson Orin NX gpio , cudnn	14	413	April 30, 2025
Jetson Orin NX typec is changed to usb3.0 in host mode Jetson Orin NX usb , board-design	2	227	December 5, 2024
Orin NX add USB3.0 to port USB2.0 Jetson Orin NX usb , device-tree	9	1936	February 16, 2023
Problems enabling usb 3.0 on orin nx Jetson Orin NX usb , board-design	9	1328	March 28, 2025
Jetson Orin Nano USB Problem Jetson Orin Nano usb , board-design	7	2018	October 31, 2023

Replace FUSB301TMX by FUSB303TMX

Related topics