Hi folks, I will try my luck again, There is some problem that I do not succeed to solve first I will describe my setup: my computer (windows) jetson orin nx another windows computer with MPVplayer (some aplication). ** All the computers/jetson connect to the hub. I do 2 experiments the first I…

gst-launch-1.0 udpsrc uri=udp://234.0.0.0:46002 caps="application/x-rtp, media=(string)video, clock-rate=(int)90000, encoding-name=(string)MP2T, payload=(int)33" ! rtpmp2tdepay ! tsdemux ! queue ! h264parse ! nvv4l2decoder enable-max-performance=1 ! nvvideoconvert ! autovideosink

[image] ariel27593: I take the recorded pcap and play am with Colsoft the mpv player again succeed to see the video Just to clarify: you play the recorded pcap file on your windows computer(1), and the pipeline on the other computer(3) with MPVplayer can receive the stream and display correct…

Yes, you describe it right. I attached images from Wireshark one from Windows computer(3) and one from Jetson (2). I am not really sure where I see the MAC I think that I see it in Jetson NVIDIA IPv4mcast. I hope you will succeed to help me I try anything a long 10 days. [jetson_1] [jetson_2] […

Maybe you need check with networking expert, imho this is an Ethernet loopback condition and the frame is discarded in Orin NX’s NIC, you can check ifconfig to see if it has RX error or drops statistics.

Hi thank you for the reply, Unfortunately, I am not so expert I will be very happy if you can give me more details or instructions on how I can tackle this problem. I will mention again my setup of two Windows computers and one Jetson orin connected to the hub so I am in some “close system”. In ge…

I try the following experiemnt just take from udpsrc to .ts file with the following pipeline: gst-launch-1.0 -v udpsrc uri=udp://234.0.0.0:46002 caps="application/x-rtp, media=(string)video, clock-rate=(int)90000, encoding-name=(string)MP2T, payload=(int)33" ! rtpmp2tdepay ! filesink location=recei…

I sucssed to capture UDP stream using the setup. I run your example and I sucssed to capture video Sender side: gst-launch-1.0 videotestsrc is-live=1 ! video/x-raw,width=1280,height=720 ! timeoverlay valignment=4 halignment=1 ! nvvidconv ! 'video/x-raw(memory:NVMM),width=1280,height=720' ! tee na…

Hi, You may apply the same to your use-case and try. It may be better to encode into h264 or h265. The compression ratio is better than JPEG.

unfortunately, I can’t change it. I make to myself this sample example because in the future someone send my MPEG2 video in RTP and I need to capture this stream. I think this is a very strange problem because if you read my first message in the post you pay attention that I succeed to capture the…

RTP reciver from pcap UDP

Accelerated Computing Intelligent Video Analytics General

DaneLLL August 14, 2023, 6:19am 9

Hi,
For UDP streaming, please refer to the setup in Jetson Nano FAQ

It shall work on either Jetson platform. Please try and see if you can run it successfully.

Topic		Replies	Views
Receive RTP (Pipeline demo) DeepStream SDK gstreamer	22	2298	August 14, 2023
Python binding send RTP DeepStream SDK	12	681	June 15, 2023
Rtp mp2ts Jetson Nano gstreamer	6	536	March 25, 2024
Transmit and receive an RTP stream on the same Jetson ORIN machine Jetson AGX Orin jetson-inference , gstreamer	9	1194	May 22, 2023
When I get video stream on localhost with udpsrc, the incoming video stream is lagged and mosaic Jetson TX2 gstreamer	14	3648	July 7, 2022
UDP-Raw Stream Issue On Nvidia Jetson Devices Jetson TX2 gstreamer	7	3770	August 30, 2023
Jetson-inference input RTSP over UDP Jetson Nano rtsp , jetson-inference	1	1780	November 30, 2021
Tcpclientsink streaming video to other device via WIFI failed Jetson Nano rtsp , wifi	4	1860	June 11, 2021
RTP streaming not displaying on host Jetson Nano gstreamer	7	1086	July 21, 2023
Problem with receiving RTSP stream Jetson AGX Orin rtsp	7	439	June 18, 2025

RTP reciver from pcap UDP

Related topics