Hi I am using a custom board for xavier nx SOM. I have made the status=“okay” for sdhci1 and I have changed the card detect gpio according to my current board.But there is no device node created for my sd card in /dev/mmcblk* .Q, 2 is the card detect gpio . I have not changed the default mux setting…

Hi, This is a duplicated issue. Please refer to previous thread here. [image] Jetson_Xavier_NX_GPIO08 is FAN_TACH and SD card detect , I need the two function Jetson Xavier NX I need FAN_TACH and SD card detect, I don’t know to implement two function in the pin GPIO08,Ca…

Sd card not detected on xavier nx custom board

Autonomous Machines Jetson & Embedded Systems Jetson Xavier NX

WayneWWW July 9, 2020, 2:44am 3

Hi,

This is a duplicated issue. Please refer to previous thread here.

1 Like