Testing usb cam on deepstream test1 usb-cam app without pgie config file

[junshengy]

@muhammadanas

gst-launch-1.0 v4l2src device=/dev/video0 ! "image/jpeg, width=1920, heig

You can modify the deepstream-test1-usbcam.py source code according to this pipeline and it should work fine.

@muhammadanas

However when I run the pipeline alternatively, I get the following output with error:

I’m not sure if it’s similar to this topic, you can refer to it

Running multiple USB cam on nano | Error: Failed to allocate required memory

Hi, Please check Suggest you use USB3 cameras.