Hi I am trying to below simple gstreamer command to run usbcam. 1 camera runs fine. More than 1 camera, it throws error. gst-launch-1.0 v4l2src device=/dev/video1 io-mode=2 ! image/jpeg,width=640,height=480 ! jpegdec ! xvimagesink Setting pipeline to PAUSED ... Pipeline is live and does not need…

No, it would not work for MJPG streams. But what you could try could be using a USB2 hub for connecting 2 cameras. I suspect a driver issue. USB2 bandwith is lower, but it may be enough for 2 cameras or more with very low resolution and framerate… In your case, not sure you can really down the fr…

Running multiple USB cam on nano | Error: Failed to allocate required memory

Robotics & Edge Computing Jetson & Embedded Systems Jetson Nano

DaneLLL March 18, 2020, 2:34am 4

Hi,
Please check

Suggest you use USB3 cameras.

Testing usb cam on deepstream test1 usb-cam app without pgie config file

Topic		Replies	Views
Three cameras on Jetson Nano Jetson Nano camera	21	4019	October 15, 2021
Problem with two USB cameras Jetson Nano camera , usb	6	2775	October 15, 2021
Two 1080p USB cameras on Nano Jetson Nano camera , opencv , kernel	17	3286	October 15, 2021
Running more than 2 USB camera on Jetson NX with DeepStream5.0 \| Error: Failed to allocate required memory Jetson Xavier NX camera , gstreamer	6	1573	October 18, 2021
Problem with second USB camera on Xavier NX Jetson Xavier NX camera	13	3212	October 18, 2021
Attempting to connect to NVIDIA Nano cameras log error Jetson Nano camera , gstreamer	13	776	October 15, 2021
Use gstreamer to open two USB cameras, Failed to allocate required memory Jetson Nano gstreamer	7	8071	October 18, 2021
USB capability Jetson Nano	1	826	November 19, 2019
Invalid Camera device Jetson Xavier NX camera	29	1931	October 18, 2021
Save 4 usb camera stream to 1 concatenated video Jetson Xavier NX camera , usb	20	1786	October 18, 2021

Running multiple USB cam on nano | Error: Failed to allocate required memory

Related topics