I use an imx297 sensor and when I try to get the image using Argus there is no problem and I can get one frame. But when I use the v4l2-ctl command, no data is received and nothing happens until I stop the process. v4l2-ctl -d /dev/video0 --set-ctrl bypass_mode=0 --stream-mmap --stream-count=-1 --…

hello talagimi63, [image] talagimi63: Jetson NX carrier board with Orin Nano this is not supported. please see-also Topic 250765 . please works with Jetson Orin Nano Developer Kit carrier board.

The v4l2-ctl command is freeze

Robotics & Edge Computing Jetson & Embedded Systems Jetson Orin Nano

JerryChang February 19, 2024, 9:10am 9

hello talagimi63,

this is not supported. please see-also Topic 250765.
please works with Jetson Orin Nano Developer Kit carrier board.

Topic		Replies	Views
Failure in image capture and streaming using v4l2 Jetson Orin NX camera	17	114	April 24, 2025
Orin Nano: MIPI acquisition reports CHANSEL_NOMATCH Jetson Orin Nano camera	19	1216	December 14, 2023
Capture image error Jetson Orin Nano camera	20	187	December 3, 2024
Orin nano crashes when calling VIDIOC_STREAMON Jetson Orin Nano camera	32	128	March 3, 2025
Orin NX is not responding to camera input Jetson Orin NX camera	38	501	August 13, 2024
Camera fails to capture frames with VIFALC_TDSTATE error Jetson AGX Orin camera	25	1087	February 14, 2024
Issue: capturing frames from IMX296 camera sensor on Nvidia Jetson Orin Nano Jetson Nano camera	4	378	May 30, 2024
No frame from IMX415 on orin devkit Jetson AGX Orin camera	3	540	November 6, 2023
V4l2-ctl failed with “VIFALC_TDSTATE” Jetson Orin NX	2	718	June 26, 2023
R35.6.0_Orin_Nano V4l2 get rawdata Issue Jetson Orin Nano camera	10	47	May 22, 2025

The v4l2-ctl command is freeze

Related topics