About Linux_for_Tegra/apply_binarys.sh

Autonomous Machines Jetson & Embedded Systems Jetson Nano
1

Hello,

If we unzip our software to /Linux_for_Tegra/rootfs

In the Linux_for_Tegra/ directory
Should I run sudo ./apply_binaries.sh?

Thank you.

3

Yes, you have to.

1 Like
4

Hello,

Loading the software we made with rootfs applied like this

After flashing is finished, cloning with our software installed

Can you explain what’s different?

thank you.

5

Hi,

Loading the software we made with rootfs applied like this

After flashing is finished, cloning with our software installed

Could you please stop filing any new topic just for asking same issue anymore? If you want to ask that clone topic, just use the old topic you filed to track.

No other forum users/admins could understand the full picture/story of what you are trying to do if you keep filing topics like this.

6

Hello,

I thought it was something that should be separated, so I posted a new question like this.

Thank you.

7
  1. Loading the software we made with rootfs applied like this
  2. After flashing is finished, cloning with our software installed

The difference is (2) may have your default account and local setting but (1) does not.

1 Like