After loading the driver of imx728, previewing the sensor with argus_camera found that when the lens moved quickly, a partial shadow appeared at the light source. As shown in the following figure, while checking the log, it is found that the gain of the sensor has been set to the maximum, instead of…

There is no update from you for a period, assuming this is not an issue any more. Hence we are closing this topic. If need further support, please open a new one. Thanks let’s narrow down the issue, how about disable HCG, or using dummy gain value to check you’re still seeing the same?

Adaptation of the IMX728 module on Orin nano

Robotics & Edge Computing Jetson & Embedded Systems Jetson Orin Nano

FAN666 August 24, 2023, 8:43am 4

hello JerryChang，
I used the hcg mode, and the above situation only occurs when shooting the light source and moving the lens.

Topic		Replies	Views
Orin Nano Adapts To IMX715 Image Segmentation Jetson Orin Nano camera	2	434	July 27, 2023
Pixel oversaturation with the IMX477 Jetson Orin Nano camera	8	91	August 19, 2024
Nvarguscamersrc is slow when setting gain such that the image is dark Jetson Orin NX camera	4	79	August 14, 2024
ORIN NANO cannot light the SENSOR using the linux35.4.1 driver package Jetson Orin Nano camera	7	540	August 15, 2023
ISP cannot processing entire image at 50M Jetson AGX Orin camera	2	13	September 16, 2024
Auto Exposure with ISP jumping exposure values Jetson Nano camera	7	1118	October 15, 2021
Difference in Available Sensor modes when using RPi Camera V.2 with Orin Nano and Nano 2/4 GB Jetson Orin Nano camera , gstreamer	4	478	May 8, 2023
WDR camera sensor for Orin Nano with 5MP Jetson Orin Nano camera	3	256	March 3, 2024
nvgstcapture - IMX274 :: Image to dark Jetson TX1	2	888	October 18, 2021
Slowing the response-rate of nvarguscamerasrc auto exposure and gain control Jetson Nano	13	1668	October 14, 2021

Adaptation of the IMX728 module on Orin nano

Related topics