Hi NVIDIA team, I’m currently working on a custom carrier board (using an Orin NX SOM). This custom carrier board has an extra ethernet interface connected to C7 (x1). This C7 port is connected to a LAN7430/Y9X Gigabit Ethernet bridge. I’m verifying that I have everything to make it work. I haved a…

Is it rel-36 or rel-35? We only guarantee the pcie part (lspci) will detect it. The rest of driver is from vendor. Modified the OMDATA to use the appropriate uphy configuration. Modified the pinmux for the C7 pins. Enabled the PCIE controllers from the kernel device tree. Added the GPIOS to contro…

Adding an aditional ethernet interface to C7 (x1) on Orin NX custom carrier board

Robotics & Edge Computing Jetson & Embedded Systems Jetson Orin NX

OscarPorras June 14, 2024, 10:09pm 5

Hi Wayne,

I saw this Bringing up an Ethernet Interface over PCIe
Is that also needed?

thanks!

Topic		Replies	Views
How to integrate LAN7430 into Orin NX based carrier board? Jetson Orin NX pcie	4	503	January 31, 2024
add two ethernet port but not working Jetson AGX Xavier	15	2004	October 18, 2021
Bringing up an Ethernet Interface over PCIe Jetson AGX Orin pcie	2	1422	December 14, 2022
Orin NX 8gb PCIE C7 and C9 don't work Jetson Orin NX pcie , board-design	6	1176	April 24, 2023
Add three ethernet port but it can not working Jetson AGX Xavier board-design , ethernet	29	2487	April 2, 2022
How to enable pcie C7 in Jetpack5.1.2_R35.4.1 Jetson Orin NX pcie	11	911	September 4, 2023
For the Jetson orin board,How to up PCIe EP mode link in the tvnet driver? Jetson AGX Orin pcie	3	1129	October 19, 2022
Phylink never came up Jetson Orin NX pcie	8	996	May 17, 2023
PCIE(C7) - is not working for Jetson AGX orin custom board Jetson AGX Orin pcie , board-design	2	524	October 26, 2023
To support Orin NX miniPCI pinmux issue Jetson Orin NX pcie	34	1271	June 7, 2023

Adding an aditional ethernet interface to C7 (x1) on Orin NX custom carrier board

Related topics