Hi @JerryChang I followed the procedure as mentioned in : Tegra channel error recovering on Xavier when capturing with v4l2 - #9 by JerryChang The issue I’m facing is that : If there’s a crash in v4l2 subsystem if we try to preview alongside gst-launch-1.0 and v4l2-ctl board is rebooting. V4l2…

hello yash.j, you cannot access the same sensor stream with v4l2-ctl and gstreamer command simultaneously. please enable fpsdisplaysink plugin to shows frame-rate in the gstreamer pipeline. for example, $ gst-launch-1.0 nvarguscamerasrc sensor-id=0 ! 'video/x-raw(memory:NVMM),width=1920, height=…

Auto reboot when tried to preview with v4l2-ctl

Autonomous Machines Jetson & Embedded Systems Jetson Xavier NX

yash.j February 3, 2021, 5:43am 4

Thanks for the information. We are working with L4T 32.4.2.
Can you suggest best method to test patches suggested for solving v4l2 subsystem crash on fauty preview here ?

Regards,
Yash

Topic		Replies	Views
v4l2-ctl capture works, gstreamer fails Jetson AGX Xavier	8	4931	October 18, 2021
Cannot use gstreamer with CSI camera. V4L works fine Jetson AGX Xavier camera	6	410	December 4, 2023
How to open CSI Camera which is connected using MIPI connector? Jetson TX2	10	3336	October 18, 2021
Jetson L4T 35.1 - CSI camera's issue with gstreamer Jetson AGX Xavier camera	19	1843	November 2, 2022
Failed to access the onboard camera using 'nvcamerasrc' Jetson TX1	18	3789	December 27, 2017
Issue when try to use v4l2loopback and nvv4l2camerasrc Jetson Xavier NX camera	25	1266	June 13, 2023
/GstPipeline:pipeline0/GstV4l2Src:v4l2src0: Call to S_FMT failed Jetson Xavier NX camera , gstreamer	9	1145	August 10, 2022
implementation of v4l2loopback for devkit onboard csi camera Jetson AGX Xavier	11	4333	October 18, 2021
Camera preview failed Jetson AGX Xavier camera	3	960	October 18, 2021
Nvarguscamerasrc always fails the first time at boot, Jetson AGX Xavier camera	9	759	January 19, 2022

Auto reboot when tried to preview with v4l2-ctl

Related topics