Boot from USB on Jetson Xavier NX

Robotics & Edge Computing Jetson & Embedded Systems Jetson Xavier NX
,
24

If your setup is correct, you shall see the kernel cmdline with “PARTUUID=” as below log.

[    0.000000] Speculative Store Bypass Disable mitigation not required
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2000880
[    0.000000] Kernel command line: console=ttyTCU0,115200 video=tegrafb no_console_suspend=1 earlycon=tegra_comb_uart,mmio32,0x0c168000 gpt usbcore.old_scheme_first=1 tegraid=19.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.4.2 vpr_resize sdhci_tegra.en_boot_part_access=1    quiet root=**PARTUUID=6d3b9329-4eee-4527-adbd-9a8e1071929b** rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0
25

After removing “quiet” in Linux_for_Tegra/rootfs/boot/extlinux/extlinux.conf, reflashed the board. Please check the attached logs.xavier_latest_boot_logs.txt (44.8 KB) .Please let us know for proceed next.

26

How did you prepare the rootfs? Your rootfs looks corrupted.

27

Thanks!, After preparing the new rootfs issue got resolved and the board is booted successfully, but when we are trying to installing Cuda packages board is getting rebooted continuously. Even after connecting external cooling fans also the board is getting rebooted while installing packages.
Please find the below attached boot logs of Xavier NX, kindly look into this and provide your valuable feedback.

Thanks in advance!

xavier_kernel.log (269.8 KB)

28

Hi vignesh.nanjundan,

Have you managed to get the CUDA installation issue resolved?
Or it’s still an issue to support?

29

Hi Kayccc, We figured out that the issue is with USB2.0 after we tried with the USB 3.0 issue got resolved, now everything is working fine and also we are able to install all packages.
Thanks!