Hi everyone, I use orin development kit the Jetpack version is 5.0 I use command sudo ./flash.sh -r -k APP -G clone.img jetson-agx-orin-devkit mmcblk0p1 clone device then the clone.img size is 0, and clone.img.raw size is 62,225,330,688 byte (not a multiple of 4096)。Is anything wrong with f…

There is no update from you for a period, assuming this is not an issue any more. Hence we are closing this topic. If need further support, please open a new one. Thanks Is this still an issue to support? Any result can be shared? Thanks

Sounds like this issue. [image] Failed to sparse the raw to img due to the size of system.img.raw is not mulple of 4096 Jetson AGX Orin I flash the orin devkit with jetpack5.0 via sdkmanager, and want to clone a system.img . Blockquote sudo ./flash.sh -r -k …

Could you move to jp5.0.1? We won’t fix some issue on old release. Only from the latest release to check.

What is the kernel version in jp5.0.1? Is also 34.1?

Referce to this link: https://forums.developer.nvidia.com/t/failed-to-sparse-the-raw-to-img-due-to-the-size-of-system-img-raw-is-not-mulple-of-4096/215526/3 I find that the issue will happen when I flash the orin devkit by SDKmanager before cloning, It’s successful if I flash devkit by command li…

Could you give some more detail? You means if your flash sdkmanager, and directly run the clone command without doing anything else, then you will hit this error?

Hi WayneWWW, The fellowing steps as below, it works well. Assemble the rootfs $tar -xvf Jetson_Linux_R34.1.0_aarch64.tbz2 $ sudo tar -xpf Tegra_Linux_Sample-Root-Filesystem_R34.1.0_aarch64.tbz2 $ sudo ./apply_binaries.sh Flash the devkit (This step is for generating some dependencies,such …

Hi @kenny_234 , Sorry for one question. What would happen if you don’t do step 1 but let sdkmanager do it all alone? I mean sdkmanager will also install Linux_for_Tegra and rootfs to your host. If you use that one, would you still hit error?

If I don’t do step 2 flash development kit by sdkmanager then clone the clone.img.raw size is not mulple of 4096. I don’t know why flash the kit by sdkmanager will hit the error.

Clone Jetson device fail

Robotics & Edge Computing Jetson Systems Jetson AGX Orin

WayneWWW June 22, 2022, 1:43am 3

Sounds like this issue.

Though I am still not sure why I cannot reproduce this issue. Is it jp5.0 or jp5.0.1?

Topic		Replies	Views
Failed to sparse the raw to img due to the size of system.img.raw is not mulple of 4096 Jetson AGX Orin clone	19	5428	August 18, 2022
AGX Orin clone failed， because system.img.raw is not a multiple of 4096 Jetson AGX Orin clone	21	2869	September 28, 2022
Failed to sparse the raw to img due to the size of system.img.raw is not mulple of 4096 Jetson AGX Orin clone	43	1564	December 9, 2023
How do I backup and clone Orin Jetson AGX Orin clone	9	3816	June 13, 2023
Can not flash by use clone image of orin agx platform Jetson AGX Orin reflash , clone	4	1179	March 10, 2023
Can't clone AGX Orin image with JetPack5.1.2 Jetson AGX Orin clone	8	933	August 16, 2023
Clone jetson orin system.img can not flash Jetson AGX Orin nvbugs , system-setup	2	904	June 29, 2022
Error cloning and restoring Jetson Orin Jetson AGX Orin reflash , clone	4	1555	February 15, 2023
Meeting error when I flash the image to the target board (clone a Jetson device and flash) Jetson AGX Orin clone	25	1166	December 21, 2023
Clone APP with error Jetson AGX Orin clone	2	951	November 15, 2022

Clone Jetson device fail

Related topics