When I try to use a CSI camera, LI-IMX219-MIPI-FF-NANO-HI136 V1.3, the error message “Could not read image from camera.” is displayed, although camera connection is confirmed. The version of Oven CV is 4.1.1. And when using USB camera, there are no problems. Would you please advise the root cause …

Hi tykmorikawa, Sorry for the trouble. I assume you are using the Jetson Nano Developer kit with two MIPI connectors. Actually, the original Nvidia driver should support IMX219 camera directly. You can download the drivers (OS image) from link below and flash it to Nano. L4T | NVIDIA Developer Pl…

NVIDIA Developer Forums

CSI Camera Issue

Autonomous Machines Jetson & Embedded Systems Jetson Nano

Honey_Patouceul May 2, 2021, 8:22pm 2

You may try this and tell more.