I am attempting to use the SPE while using a CSI camera. I am currently using e-Con e-CAM121 CUOAGX camera on my Jetson Orin Dev Kit 64GB (JetPack 5.1.2). I followed the steps mentioned here to compile and flash a slightly modified version of the ivc-echo-task.c . This modified code simply prints …

Have you ever checked the kernel DTB loaded 'AFTER installing the eCon camera drivers '? You can just dump the kernel DTB in run time, and confirm whether the change for data_channel still exists. br Chenjian

CSI Cameras with SPE

Robotics & Edge Computing Jetson & Embedded Systems Jetson AGX Orin

jachen February 26, 2025, 2:29am 8

You can just update the DTB to enable data_channel.

br
Chenjian

Topic		Replies	Views
How to add another CSI camera? Jetson TX1	8	3328	March 10, 2016
[Jetson TK1] CSI camera sensor Jetson TK1	18	13245	November 25, 2015
Can't get data from MIPI-CSI interface Jetson TK1	1	1048	May 12, 2016
How to grab pre-configured csi video stream without I2C? Jetson TX2	67	12091	April 16, 2018
Jetson TX2 CSI port interfacing Jetson TX2	7	3454	October 18, 2021
TX2 video input that is not an i2c device. Jetson TX2	15	2617	October 18, 2021
How to interact with AON SPE? Jetson AGX Xavier	4	897	October 18, 2021
OV5693_V4l2 changing from CSI_C to CSI_A Jetson TX1	7	3319	April 28, 2016
Two CSI cameras each work individually, but not at the same time Jetson TX2	7	891	October 18, 2021
How to integrated work SPE-fw and CUDA? Jetson TX2	35	3326	August 25, 2021

CSI Cameras with SPE

Related topics