DGX Spark network issue

Accelerated Computing DGX Spark / GB10 User Forum DGX Spark / GB10
1

Im facing network issue on my GB10 .
The wifi is working but the ethernet is not working , it is being conneccted but there is no ip shown for ethernet .

3

If you run ip a in the terminal you should see the ethernet interface. Can you share its status? Should say it is UP and is connected BROADCAST
Example:

2: enP7s7: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
    link/ether xx:xx:xx:xx:xx:xx brd ff:ff:ff:ff:ff:ff
    altname enP7p1s0
    inet xx.xx.xx.xx brd xx.xx.xx.xx scope global dynamic noprefixroute enP7s7
       valid_lft 14887sec preferred_lft 14887sec