Continuing the discussion from Error Re-Flashing Jetson Xavier NX eMMC after booting from NVMe : I recently got other host that can dump log, and here the serial console log after reflashing it using Jetpack 4.6.1: Log File Error 08 Jan 2023.txt (50.4 KB) Serial Console Output Install 08 Jan 2023.…

Hi, Please flash your device with latest jetpack5.1 release and see if issue is still there. We have a DRAM table decided by hardware pin because there are also multiple kinds of jetson NX modules in market. For example, some of jetson NX modules may use DRAM from Hynix. Some of them may be from …

Hi, Is your board still able t o boot up? If so, could you boot up and share the boot log? If your board cannot boot anymore, I want to confirm if this module was able to get flashed before.

No it was unable to boot up after I following this guide: Jetson Xavier NX - Run from SSD - JetsonHacks This was my first time to flash this module, I want to reflash the module because the module was unable to boot up.

Are you using sdkmanager to flash the board or you are using flash.sh tool directly?

And could you just boot up the device and share the serial console log ? I know you cannot boot up, just want to check the log first.

Should I boot it up in recovery mode or just boot it the normal way?

[Serial Console Output] This is what I get when I try to boot it up the normal way

Could you use picocom instead of minicom and try again? With command sudo picocom -b 115200 /dev/ttyUSB0.

If I tried to copy it, it doesn’t seems right but just in case you need it: Welcome to minicom 2.7.1 OPTIONS: I18n Compiled on Aug 13 2017, 15:25:34. Port /dev/ttyUSB0, 21:39:21 �[��0)��W 5dYW+պ�M�IC�ۂ°)��WJy ��KU�YWk�i T*�5�[��0)��W

Error Re-Flashing Jetson Xavier NX eMMC after booting from NVMe (2)

Robotics & Edge Computing Jetson Systems Jetson Xavier NX

aangiqbal26 January 8, 2023, 2:36pm 6

I’ve tried using the sdkmanager tool to flash the board for the first time and failed with the log I shared in This Post, then I tried it again using flash.sh tool to see the serial console output

Topic		Replies	Views
Error Re-Flashing Jetson Xavier NX eMMC after booting from NVMe Jetson Xavier NX reflash	6	891	November 30, 2022
Can not flash Jetson Xavier NX? Jetson Xavier NX reflash	20	1305	August 8, 2023
Can't flash Jetson Xavier NX board Jetson Xavier NX reflash	18	1358	August 3, 2022
Xavier NX wont boot, sdkmanager hangs up while trying to flash Jetson Xavier NX boot	24	2282	October 5, 2021
Jetson Xavier NX stopped working unexpectedly Jetson Xavier NX kernel	20	3415	July 5, 2021
Jetson xavier xn stuck in boot loop after trying to initrd flash to nvme SSD Jetson Xavier NX boot	9	1485	January 16, 2023
Flash failed, return 8 Jetson Xavier NX reflash	34	2145	April 27, 2023
Jetson Xavier NX (Developer Edition) not starting (blank screen) Jetson Xavier NX boot , hw , ubuntu , usb , power	20	3804	July 1, 2022
UNable to flash NX Jetson Xavier NX reflash	27	4863	April 28, 2021
Error flashing Xavier NX Jetson Xavier NX reflash , board-design	4	342	June 30, 2024

Error Re-Flashing Jetson Xavier NX eMMC after booting from NVMe (2)

Related topics