Hi All, I’m currently running Linux for Tegra R24.2.1 and am experiencing periodic restarts. Some specifics of the situation: I'm using a custom developed carrier board that contains an MCS9990 USB2 root hub connected to the TX1 PCIe bus The restarts occur only when an Atheros 9K WiFi module is …

Hard CPU lockup when using PCIe USB Hub

vidyas March 6, 2017, 2:58pm 2

Please try with L4T 23.x
Also, Can you please try connecting any other USB device(s) (like a thumb drive/mouse/keyboard) and see if things are fine?

Topic		Replies	Views
R24.2 (TX1) Kernel hangs during bootup on PCIe (PLX Switch) - R23.2 was ok. Jetson TX1	10	2114	September 23, 2016
USB hub doesn't work with L4T R24.2.1 Jetson TX1	21	2171	May 3, 2017
PCIE driver issue with L4T R24.2.1 Jetson TX1	2	1371	October 18, 2021
TX1 hangs just after boot up when PCIe card is connected Jetson TX1	22	3956	July 6, 2017
jetson-tx1 pcie2sata connect hdd disk error with ahci msi as interrupt Jetson TX1	27	4129	October 22, 2024
In the L4T R28 for TX1 the USB lane mapping is bug? Jetson TX1	15	1721	October 18, 2021
USB3 xhci problem Jetson TX1	9	3987	October 18, 2021
Error in pcie driver when using NVME 'drive' on TX2 Jetson TX2	29	5846	June 4, 2017
PCIe USB3.1 expansion card doesn't work Jetson TX2	14	4120	July 26, 2018
PCIe issue on igb device Jetson TX1	4	2236	October 18, 2021