Hi NV_Team, We have a USB3.0 device used on NX, the USB3.0 is not plug and play (such as UVC Camera). Its initialization takes about 8seconds, so we need to delay 10seconds then to start USB3.0 Hub to enumerate the usb device. But we don’t know how to delay 10seconds on Jetson NX to start USB Hub …

Hi, A user shares a methond to off/on the hub: [image] Power down USB ports Jetson Nano I think I found a solution now. After trying various different tools it looks like uhubctl supports the RTS5411 USB-Hub of Jetson Nano! I can successfully power down/up the all USB po…

How to delay USB hub to enumerate usb3.0 devices?

Robotics & Edge Computing Jetson & Embedded Systems Jetson Xavier NX

Luna2020 August 13, 2021, 11:32am 4

Hi DaneLLL,

Thanks for your information. It works.

Topic		Replies	Views
How to disabled USB3.0 on Xavier NX? Jetson Xavier NX usb	12	927	February 1, 2023
USB port power turn off in Jetson Nano (using uhubctl) Jetson Nano usb	2	134	March 7, 2025
USB device does not enumerate after ubuntu boot Jetson Nano usb	17	2984	March 7, 2023
Howto disable/enable USB p[orts on NX programmatically? Jetson Xavier NX usb	5	2728	October 18, 2021
Switching off USB hub - Jetson NX Jetson Xavier NX camera , usb	2	1244	October 18, 2021
Power down USB ports Jetson Nano gpio , usb , power	7	6952	October 15, 2021
Jetson xavier nx USB3.0 port 2 can not use? Jetson Xavier NX usb	2	558	June 17, 2022
USB not recognized at boot/startup Jetson Nano usb	9	754	June 5, 2023
Switch on and off usb ports programmatically on AGX Jetson AGX Xavier usb	8	4004	October 18, 2021
USB 3 Vision devices sometimes not detected Jetson Xavier NX usb , board-design , nvbugs	19	338	September 18, 2024

How to delay USB hub to enumerate usb3.0 devices?

Related topics