How to set display MIPI at bootloader


I’d like to know how to set MIPI display at bootloader.
have MIPI display panel and ported it at Kernel mainline. but failed to find related code at booting.
So I can’t display boot log until it set the display after bringup.

I guess there’s some point at uboot but failed to find the codes.

Please let me know some point to start.

Thanks, CHJung


Actually we don’t enable MIPI DSI in uboot anymore. Instead, we enable display in cboot.

However, it is only for HDMI. Please try to check the cboot source from download center.