Example: when I plug my nodeMCU ESP-12E with this code or other USB serial devices I can’t communicate even with /dev/ttyUSB0 open. (Google translator) sudo screen /dev/ttyUSB0 115200 sudo gtkterm -p /dev/ttyUSB0 -s 115200 #include <Arduino.h> #define LED_PIN 2 void setup() { Serial.begin(115…

The Arduino works #include <Arduino.h> #define LED_PIN 13 void setup() { Serial.begin(115200); pinMode(LED_PIN,OUTPUT); } void loop() { if (Serial.available() > 0) { char data = Serial.read(); if(data=='0' || data=='1'){ Serial.print("Data: "); Serial.print(data-'0…

I can't communicate using USB serial

Robotics & Edge Computing Jetson & Embedded Systems Jetson Nano

zeguilherme January 13, 2022, 7:30pm 2

i tried to re-compile the usb modules and it continued with the same problem
a-guide-to-solve-usb-serial-driver-problems-on-tx2/60787

Topic		Replies	Views
Unreliable serial communcation via the UART TX/RX GPIO Pins Jetson Xavier NX gpio , uart	29	11029	July 7, 2021
Serial communication between Jetson nano and Arduino through GPIO Jetson Nano gpio	12	10968	October 18, 2021
Jetson Nano - Issues Communicating with Arduino through UART Jetson Nano	11	8273	October 14, 2021
UART connection between jetson nano and ESP8266 board via USB cable Jetson Nano uart	6	378	May 28, 2024
Interfacing with the Jetson USB port Jetson TX2	18	12034	May 10, 2018
Flashing Jetson nano emmc fails Jetson Nano boot , reflash	27	1414	June 3, 2022
Jetson Nano how to use UART on /ttyTHS1 Jetson Nano uart	8	22919	October 15, 2021
Jetson Nano Unable to Communicate with Serial Device Jetson Nano	6	4807	October 18, 2021
No communication between Jetson Xavier NX and Linux host - can't boot or flash Jetson Xavier NX usb	7	813	January 2, 2023
Jetson Nano No Response Jetson Nano boot , nano2gb	29	2009	February 11, 2022

I can't communicate using USB serial

Related topics