I’m currently trying to use Raspberry Pi V2 Camera connected to Jetson Nano to perform Aruco Marker detection. I’ve run this code in Jetson Nano and it works fine: gst-launch-1.0 nvarguscamerasrc sensor_id=0 ! ‘video/x-raw(memory:NVMM),width=1920, height=1080, framerate=30/1’ ! nvvidconv flip-…

With the same python version as used for this script, try: import cv2 print(cv2.getBuildInformation()) and check in output for GStreamer SUPPORT. If it shows NO, then it would explains why it fails. In such case, you would install an opencv version with gstreamer enabled.

Jetson Nano python script could not open Raspberry Pi V2 Camera

Robotics & Edge Computing Jetson & Embedded Systems Jetson Nano

1181101646 May 23, 2023, 2:50pm 9

I modified it in the python script and it still shows “unable to show camera”

Topic		Replies	Views
Problem with using Camera in Python on Jetson Nano 2GB Jetson Nano camera , gstreamer	2	793	March 29, 2023
Green Screen OpenCv Pi camera Jetson Nano camera , opencv	4	1053	January 4, 2023
Trouble CSI camera on jetson Nano Jetson Nano camera	3	669	April 21, 2023
Unable to open camera Jetson Nano camera , gstreamer	3	639	February 21, 2023
Correct openCV pipeline for CSI RPi camera v2 on Jetson Nano Jetson Nano camera , opencv	2	2025	November 4, 2021
Green screen when using Raspberry pi camera v2 attached to Jetson nano and cv2 (openCV) Jetson Nano camera , opencv , gstreamer	12	6246	October 15, 2021
I can't open raspberry pi camera using jetson nano Jetson Nano camera	9	154	December 20, 2024
CSI-Camera Raspberry Pi v2 not work on Jetson Nano Jetson Nano	11	13779	October 14, 2021
No GStreamer support on OpenCV Jetson Nano	2	4894	October 18, 2021
Error: unable to open camera (openCV 4.5.4 version] Jetson Nano camera	4	3492	April 27, 2022

Jetson Nano python script could not open Raspberry Pi V2 Camera

Related topics