Can Jetson Orin Nano support 8x CSI-Camera feeds (1920x1080@30fps) using Virtual Channels?
CAM0 - 4x VC 1920x1080 30fps RAW10 w/ 2-Lanes (~2.5Gbps aggregated avg. Video, with 2Gbps/MIPI Lane-speed)
CAM1 - 4x VC 1920x1080 30fps RAW10 w/ 2-Lanes
Total avg. Bandwidth ~5Gbps.
Is there a know supported Maximum Bandwidth per MIPI Port? (CAM0, CAM1)
Can the ISP or/any other Firmware/Driver/Middle Layer limit the bandwidth?
I moved the question to the NVIDIA Jetson Orin Nano forum
Suppose could support this case.
2.5.2 Video Input (VI) - DS-11105-001_v1.5.pdf
The VI block receives data from the CSI receiver and prepares it for presentation to system
memory or the dedicated image signal processor execution resources. The VI block provides
formatting for RGB, YCbCr, and raw Bayer data in support of several camera user models. These
models include single and multi-camera systems, which may have up to six active streams. The
input streams are obtained from MIPI compliant CMOS sensor camera modules.
How can it support eight active streams in the case that VI supports only six?
Each VI port support 4 virtual channel.
This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.
