Hi There, I’m trying to migrate camera driver from TX2 to Xavier NX. We’re using the same sensor (IMX385) and JetPack (4.4.1) for both SOMs. I didn’t change anything in the deriver but modified the device tree to match the new carrier board. I was able to set camera parameter using v4l2-ctrl, howe…

Hi Jerry, Thanks for the suggestion! I skipped that test and just went ahead and moved everything to JetPack4.6 with L4T32.6.1. Everything just worked after that. No need to boost the clock and argus_camera worked as expected. I guess there might be some bugs in vi5 which got fixed in newer versio…

Migrate camera driver from TX2 to Xavier NX "no reply from camera processor"

Robotics & Edge Computing Jetson Systems Jetson Xavier NX

JerryChang March 30, 2022, 8:28am 3

hello jdluckyday,

you may dig into the root cause,
BTW, please also refer to Topic 187824 to apply the fix of NULL pointer dereference in kernel.
thanks

Topic		Replies	Views
Camera driver adaption issues Jetson Xavier NX camera , kernel , device-tree , linux-driver	3	978	September 20, 2023
No reply from camera processor Jetson Xavier NX camera	4	379	November 21, 2023
Camera Porting Issues Jetson AGX Xavier camera	16	872	August 8, 2023
Custom carrier board camera playback failed Jetson Xavier NX camera , board-design	26	2316	October 18, 2021
Vi errors occurred for custom sensor driver Jetson Xavier NX camera	27	1071	July 27, 2022
[RCE] ERROR: camera-ip/vi5/vi5.c:745 [vi5_handle_eof] Jetson Xavier NX camera	16	1145	August 18, 2023
No reply from camera processor Jetson Xavier NX camera	13	925	May 6, 2022
No cameras available in Xavier NX Jetson Xavier NX camera	11	1878	October 18, 2021
Vi_capture_setup: control failed, errno 1 Jetson Xavier NX camera	10	1268	July 4, 2022
Error in capturing the image via Xavier NX Jetson Xavier NX camera	42	519	December 31, 2024

Migrate camera driver from TX2 to Xavier NX "no reply from camera processor"

Related topics