Dear NVIDIA Community, I am trying to use the UART0 (uartb) pins 99 and 101, and upon inspecting the device tree binary (DTB) tegra234-p3701-0000-as-p3767-0000-p3737-0000.dtb, I can see that uartb is enabled: serial@3110000 { ... status = "okay"; phandle = <0x2d7>; }; However, when I …

I’ve successfully resolved the UARTB issue on my Orin NX + p3059 board. I enabled the serial@3110000 by modifying the device tree in the file tegra234-p3767-0000-p3509-a02.dts as follows: serial@3110000 { compatible = "nvidia,tegra194-hsuart"; iommus = <0x06 0x04>; dma-coher…

Hi andres_r8, What’s your current carrier board in use for Orin NX? and the Jetpack verion? Is there any flash log to make sure which dtb in use?

The carrier board is Xavier NX DevKit. Here is the Flash Log sdkm-2023-04-05-13-47-37.log (3.5 MB)

Hi andres_r8, 14:50:38.632 - info: NV_L4T_FLASH_JETSON_LINUX_COMP@JETSON_ORIN_NX_TARGETS: Waiting for target to boot-up... 14:50:39.635 - info: NV_L4T_FLASH_JETSON_LINUX_COMP@JETSON_ORIN_NX_TARGETS: Timeout 14:50:39.636 - info: NV_L4T_FLASH_JETSON_LINUX_COMP@JETSON_ORIN_NX_TARGETS: Cleaning up... 1…

Hi Kevin FF, Upon examining the log file, I noticed that the dtb file tegra234-p3767-0000-p3768-0000-a0.dtb is being used during the flashing process. According to the JetsonModuleAdaptationAndBringUp document, the dtb file that should be used is tegra234-p3767-0000-p3509-a02.dtb. I would like to …

[image] andres_r8: I would like to ask why the SDKManager is using a different dtb file than the one mentioned in the document. Is there an updated recommendation, or is this an issue with the SDKManager? Just like I mentioned above, Orin NX+p3509 carrier board is not supported to be flashed …

I’ve successfully flashed the Orin NX + p3059 on the same board. However, I’m encountering an issue during the SDK components installation, as it fails at that step. Despite this, the system still boots successfully.

Missing /dev/ttyTHS1 for UART0 (uartb) on NVIDIA Jetson Orin NX

Robotics & Edge Computing Jetson Systems Jetson Orin NX

KevinFFF April 17, 2023, 5:55am 7

Just like I mentioned above, Orin NX+p3509 carrier board is not supported to be flashed with SDK Manager. Please use initrd flash script instead.

Do you mean that you flash the Orin NX + p3059 with SDK Manager successfully?
Is that the another board different from the failed one? Please help to provide the flash log.

Topic		Replies	Views
How to modify the knernel on the flash pc ,so USART0 can be on automaticlly? Jetson Orin NX reflash	4	425	April 2, 2024
Jetson Orin NX16gb - How i can use the /dev/ttyTHS2 serial communication? Jetson Orin NX uart	3	356	November 6, 2024
How to use UART0 on Orin NX, Missing in /dev Jetson Orin NX uart , board-design	1	457	April 2, 2024
Orin Nano UART0 Jetson Orin Nano uart	3	468	October 8, 2024
Hardware uart1 cannot find ttyTHS* on Orin NX Jetson Orin NX uart	9	1386	March 18, 2023
Enable UART(0) on Orin NX Jetson Orin NX uart	8	2183	June 5, 2023
Trying to use UART2, but /dev/ttyTHS1 doesn't exist Jetson Orin Nano uart	7	2501	August 8, 2023
Orin Nano - Using UARTD or E or F Jetson Orin NX uart , board-design	9	1326	November 14, 2023
OrinNX : How to check UART is working? Jetson Orin NX uart	1	197	December 11, 2024
Orin NX shows nothing on the ttyTHS* uarts Jetson Orin NX uart	4	174	February 25, 2026

Missing /dev/ttyTHS1 for UART0 (uartb) on NVIDIA Jetson Orin NX

Related topics