NEW Carrier and Adapter for NVIDIA Jetson AGX Xavier from Connect Tech

Autonomous Machines Jetson & Embedded Systems Jetson AGX Xavier
#1

Connect Tech releases two new product offerings for NVIDIA® Jetson™ AGX Xavier™: Mimic – NVIDIA Jetson Xavier Adapter, and Rogue Carrier for NVIDIA Jetson Xavier.

The Rogue Carrier is a full featured Carrier Board for the NVIDIA® Jetson™ AGX Xavier™ module. This carrier board for Xavier is specifically designed for commercially deployable platforms, and has a extreme small footprint of 92 x 105mm.

The Mimic Adapter from Connect Tech allows the NVIDIA® Jetson™ AGX Xavier™ module to be installed onto an NVIDIA Jetson TX2/TX2i/TX1 carrier.

For more information, read the Connect Tech press release.

Visit the Mimic Product Page

Visit the Rogue Product Page

#2

These look like carrier boards for the variant of the Xavier with the large heat sink + case + fan structure, as on the developer kit.

Will you be releasing a carrier board for the variant of the Xavier that will ship with just the module + thermal transfer plate?

EDIT: Looking closer, it looks like it should be compatible for when the module + TTP variant release. However, confirmation would be appreciated!

#3

Thank you for your question! Yes, all carriers will work with both dev kit module + its active thermal and production module + its TTP.

#4

I’ll just assume it’ll be a thousand bucks just like the Sprocket is on Arrow then. Thanks anyway!

#5

Price information?

#6

Shawn - if you’re interested in pricing, please request a quote on our product pages, or contact sales@connecttech.com, and our sales reps can provide a quote to you. Thanks!