Nvidia Jetson Xavier NX activate TFTP/DHCP

Autonomous Machines Jetson & Embedded Systems Jetson Xavier NX
#1

Hello there,

how i can enable the tftp/dhcp on boot?

https://docs.nvidia.com/jetson/archives/r34.1/DeveloperGuide/text/SO/JetsonXavierNxSeries.html#bootloader

“Boot via TFTP, using DHCP or static IP address”

#4

Search “cbo.dts” in the document.

#5

It works.

image
image935×156 4.49 KB

do you have a example for a jetson.dtb file?

#6

What is the exact jetpack version you are using here?

#7

4.6.1

#8

Then please make sure you read the correct document first.

The link you shared is 34.1. 34.1 is jetpck5.0 DP.

how i can enable the tftp/dhcp on boot?
(Jetson Xavier NX Series — Jetson Linux<br/>Developer Guide 34.1 documentation)
“Boot via TFTP, using DHCP or static IP address”

Below document will teach you how to setup a TFTP sever on the ubuntu host.
https://docs.nvidia.com/jetson/archives/l4t-archived/l4t-3271/index.html#page/Tegra%20Linux%20Driver%20Package%20Development%20Guide/getting_started.html#wwpID0E0ZG0HA

#10

This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.