Nvidia Orin NX 32 GB not booting anymore

Robotics & Edge Computing Jetson & Embedded Systems Jetson Orin NX
,
1

Hi,

I have an Orin NX 32 GB with a dev board from Seeed Studio. The orin was flashed with Jetpack 6.0 and was working fine. Today, i tried to boot it but it fails. I can see the following boot message on the UART output:

ASSERT [FvbNorFlashStandaloneMm] /out/nvidia/optee.t234-uefi/StandaloneMmOptee_RELEASE/edk2-nvidia/Silicon/NVIDIA/Drivers/FvbNorFlashDxe/FvbNorFlashStandaloneMm.c(937): ((BOOLEAN)(0==1))

Nothing has been changed on the system, from one day to the other it just stopped booting.

Is this a known issue with Jetpack 6.0 ? and what is the solution ? can this board boot again without re-flashing?

2

This is a known issue that would be fixed in next release.

1 Like
3

Hi @WayneWWW

Thank you for the quick reply. Do you have an estimate of when the next release will be available ?

7

Encountered the exact same issue on Jetpack 6.1 on ORIN AGX 64 - WayneWWW what does “this is a known issue” mean? that devices can randomly stop booting? what should be done to recover?

8

please file a new topic on Orin AGX forum and attach the full log.

10

This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.