Orin camera can not preview

[ShaneCCC]

Have reference to below link to check the serdes_pix_clk_hz/pix_clk_hz in device tree.

IMX586 stream on timed out

Please double check the device tree file to make sure the pixel clock is set correctly. Below is some Note for Orin Skew calibration is required if sensor or deserializer is using DPHY, and the output data rate is > 1.5Gbps. An initiation deskew signal should be sent by sensor or deserializer to perform the skew calibration. If the deskew signals is not sent, the receiver will stall, and the capture will time out. You can calculate the output data rate with the following equation: Output d…