Hi. Last few days I’m trying to enable auto suspend for my 1650 card when it’s not in use. I carefully followed this manual PRIME - ArchWiki . In the end I always get ‘Not supported’: cat /proc/driver/nvidia/gpus/0000:01:00.0/power Runtime D3 status: Not supported Video Memory: …

[image] poznianski: what is the ‘right’ way for me to monitor temperature then? Not doing it at all as it needs to wake up the gpu. You could do this while gaming, e.g. using mangohud. Anything else is rather pointless.

nvidia-bug-report.log.gz (293.7 KB)

You’re running the nvidia-open driver, another user found out there’s an issue with the nvidia firmware and runtime-pm. Please switch to the closed driver and make sure the gsp firmware is disabled.

removed nvidia-open. Installed nvidia. Disabled gsp by adding to /etc/modprobe.d/nvidia-gsp.conf options nvidia NVreg_EnableGpuFirmware=0 Now I see: cat /proc/driver/nvidia/gpus/0000:01:00.0/power Runtime D3 status: Enabled (fine-grained) Video Memory: Ac…

nvidia-bug-report.log.gz (292.2 KB)

/sys/bus/pci/devices/0000:01:00.0/power/control is set to on, needs to be auto.

How can I do it? I did this: /etc/udev/rules.d/80-nvidia-pm.rules # Enable runtime PM for NVIDIA VGA/3D controller devices on driver bind ACTION=="bind", SUBSYSTEM=="pci", ATTR{vendor}=="0x10de", ATTR{class}=="0x030000", TEST=="power/control", ATTR{power/control}="auto" ACTION=="bind", SUBSYSTEM==…

Those rules should do the job, if loaded at the correct time. Did you rebuild the initrd after creating them? Since the nvidia driver is loaded from the initrd, the udev rules have to be there as well.

this is how my rule looks like # Remove NVIDIA USB xHCI Host Controller devices, if present ACTION=="add", SUBSYSTEM=="pci", ATTR{vendor}=="0x10de", ATTR{class}=="0x0c0330", ATTR{remove}="1" # Remove NVIDIA USB Type-C UCSI devices, if present ACTION=="add", SUBSYSTEM=="pci", ATTR{vendor}=="0x10de…

nvidia-bug-report.log.gz (293.2 KB)

Do you have anything like that installed? https://forums.developer.nvidia.com/t/optimus-laptop-dynamic-power-management-working-in-debian-12-not-in-linux-mint/287432/3?u=generix

Ryzen 5500U and Runtime D3 issue

Graphics / Linux Linux

poznianski April 2, 2024, 3:34pm 20

Got it. Thanks for you help and new knowledge. Have a good day!

Topic		Replies	Views
Runtime D3 support on Lenovo Legion 5 (Ryzen 7 4800H, GTX 1660TI) Linux	24	6001	November 30, 2021
Incorrect power management with PRIME configuration Linux	24	5180	September 6, 2022
PCI-Express runtime D3 power management broken by commit 4d03e3cc59828(?) Linux kernel	26	6534	January 26, 2021
NVIDIA GPU Fails to power off (PRIME) Razer Blade 14 2022 Linux laptop , rhel	44	8375	September 7, 2026
Ubuntu 20.04 - NVIDIA GPU consuming power even when using only integrated graphics card (Intel iGPU) Linux	40	11503	December 21, 2022
Debian 12 T550 runetime state always active Linux	1	609	February 25, 2024
Randomly freezes when "Preferred mode: Auto" is set to "PowerMizer" Linux nvbugs	0	432	August 28, 2023
Jetson AGX Thor JP7.1: GPU PCI power/control default value Jetson Thor	9	288	June 2, 2026
Nvidia D3 Runtime power management only works on Window Linux	6	3675	November 30, 2021
On Ryzen Mobile, Turing GPU dynamic power management seems to be broken (on driver 435.21) Linux	7	1691	May 27, 2021

Ryzen 5500U and Runtime D3 issue

Related topics