Jetson Systems Jetson Thor
| Topic | Replies | Views | Activity | |
|---|---|---|---|---|
|
NVIDIA Jetson Thor Developer Kit Power Supply
It’s strongly recommmended to use the USB-C power supply bundled with the NVIDIA Jetson Thor Developer Kit for stable operation. |
|
1 | 139 | January 26, 2026 |
|
Jetson AGX Thor Developer Kit - coil whine noise when GPU under load
I can hear a very audible coil whine or grinding type noise when the GPU is under load, such as during the testing phases of building out jetson-containers images or during inference while running models with Ollama. If … |
|
7 | 195 | February 6, 2026 |
|
Jetson Thor Field Bulletin
We are issuing a Field Bulletin relevant to Jetson Thor platform. These bulletins contain important information about hardware, firmware, and operational updates for Jetson Thor modules. Customers and partners are advise… |
|
1 | 304 | November 19, 2025 |
|
Run SGLang in Thor
Run SGLang Thor & Spark Install uv curl -LsSf https://astral.sh/uv/install.sh | sh Create environment uv venv .sglang --python 3.12 source .sglang/bin/activate sudo apt install python3-dev python3.12-dev Export va… |
|
14 | 1055 | December 2, 2025 |
|
Run VLLM in Thor from VLLM Repository
Run VLLM Thor Install uv curl -LsSf https://astral.sh/uv/install.sh | sh Create environment sudo apt install python3-dev python3.12-dev uv venv .vllm --python 3.12 source .vllm/bin/activate Install Pytorch uv pip… |
|
15 | 1431 | November 29, 2025 |
|
Jetson AGX Thor FAQ
Q: How to bypass “Failed to get eeprom handle for cvm from eeprom manager.” error during flash? This kind of issue generally comes from the i2c drive strength not enough on custom board design. Need to follow the tuning… |
|
3 | 1066 | January 20, 2026 |
|
How to skip the oobe service
|
|
1 | 7 | February 9, 2026 |
|
Why can the mma instruction only reach 50% peak computing throughput?
|
|
3 | 14 | February 9, 2026 |
|
Create encrypted rootfs image failed in secure boot on Thor
|
|
1 | 13 | February 9, 2026 |
|
Thor Update and Redundancy fail
|
|
3 | 24 | February 9, 2026 |
|
T5000的25G口不使用光模块 从T5000模组直接引出互连 无法接通
|
|
1 | 15 | February 9, 2026 |
|
PCIe Setting Question
|
|
6 | 23 | February 8, 2026 |
|
No display output on (Debian) Linux installer
|
|
5 | 34 | February 8, 2026 |
|
How to configure the Jetson Thor Type-C port to Host mode to read camera data?
|
|
0 | 11 | February 7, 2026 |
|
MIG Configuration Not Working on Thor
|
|
4 | 231 | February 7, 2026 |
|
USB-PD EPR and PMBus regulator assumptions in Jetson Thor reference design
|
|
2 | 18 | February 7, 2026 |
|
Over-consumption in Jetson THOR 70W power mode
|
|
0 | 8 | February 6, 2026 |
|
T5000的25G口不使用光模块 从T5000模组直接引出互连 无法接通
|
|
3 | 19 | February 6, 2026 |
|
[JetPack 7.1/7.0] l4t_backup_restore.sh hangs indefinitely on nvme0n1p8 for Jetson Thor
|
|
4 | 24 | February 6, 2026 |
|
Jetpack 7.1 crashed when running the command "sudo /opt/nvidia/jetson-io/jetson-io.py"
|
|
32 | 94 | February 6, 2026 |
|
EtherCAT support for Jetson THOR Module
|
|
1 | 15 | February 6, 2026 |
|
R38.4.0 Encountered a system crash issue
|
|
8 | 28 | February 6, 2026 |
|
jetpack7.1,T5000,eeprom,flash failed
|
|
10 | 44 | February 6, 2026 |
|
Sys Reset Button cause Unhandled Exception in EL3
|
|
25 | 129 | February 6, 2026 |
|
Nvjpegdecodec Segmentation fault
|
|
3 | 29 | February 6, 2026 |
|
R38.4.0 can 出现数据报错
|
|
4 | 13 | February 6, 2026 |
|
Questions about CAN (can0–can3) usage on Jetson Thor
|
|
5 | 18 | February 6, 2026 |
|
Inference Discrepancy Between TensorRT 10.13.2 (Thor) and 8.6.2 (Orin)
|
|
12 | 152 | February 6, 2026 |
|
Thor MGBE 25GAUI Channel loss budget for carrier board
|
|
1 | 18 | February 6, 2026 |
|
Xen or other EL2 hypervisor on jetson thor devkit
|
|
3 | 12 | February 6, 2026 |