Hello. I don’t know if it’s possible to get any support for the pro kit. My problem is when the board is plugged into a monitor via HDMI nothing is displayed. I can ssh and remote connect over vnc. If possible is there a way I could re-flash the board as there are other errors.

I have only experience with L4T, so I cannot say for vibrante or any other system… With L4T, such symptoms have been seen in different targets/kernel versions. Especially if you’re using a VGA/HDMI adapter… HDMI/DVI adapter should allow to get EDID from monitor. One thing to try out is hotplug. Y…

TK1 Pro HDMI does not work

Robotics & Edge Computing Jetson Systems Jetson TK1

Topic		Replies	Views
Tk1 is not booting (Black Screen) Jetson TK1	24	3735	September 25, 2016
Jetson TK1 R21.5 and 7" HDMI display... why not? Jetson TK1	22	4329	April 6, 2017
Jetson TK1 - Trouble With Particular HDMI Screen Jetson TK1	27	7643	June 15, 2017
The HDMI display issue on TK1 R21.8 Jetson TK1 hdmi	7	927	December 2, 2020
HDMI Display for Raspberry Pi on Jetson TK1 Jetson TK1	45	11924	May 14, 2018
[SOLVED] Jetson TK1 R21:: HDMI: No HDMI device connected Jetson TK1	9	4350	December 4, 2015
HDMI issue - question for WayneWWW... Jetson TX2	65	7038	January 16, 2018
Jetson TX1 not booting up Jetson TX1	24	3730	July 7, 2017
adafruit Display with Jetson tk1 Jetson TK1	15	3076	April 9, 2016
Try to get a 1024x600 screen (Eleduino Raspberry Pi 7 Inch 1024x600 Pixel IPS HDMI) working for Jets Jetson TK1	5	2490	July 31, 2016

TK1 Pro HDMI does not work

Related topics