Hi linuxdev,
thanks for explaining the USB possibilities to connect the Jetson Xavier to the host machine.
The host machine is actually the machine, on which I installed SDK Manager and flashed the jetson Xavier with.
The file I posted yesterday is the output I recieve in the terminal on Xavier after I entered
dtc -I fs -O dts -o extracted.dts /proc/device-tree
I converted it into a txt file, but by any reason I was just able to upload it as log…
I made my first attempts to backup the Jetson Xaviers image. (I try it with this tutorial) I was able to connect to the Xavier from my host computer with ssh. When I tried to copy the partition mmcblk0p1 with
dd if=/dev/mmcblk0p1 | ssh user@hostpc dd of=/directory/image.raw I recieved the error:
port 22: Invalid argument
Might this be a problem wirh SSHOpenServer? I have it installed on my Xavier. When I tried to configurate SSHOpenServer with
man sshd_config
I got an reply that no manual changes are allowed. Could it be possible, that my filesystem stays in read-only mode after I once set it with
echo u > /proc/sysrq-trigger
in the first steps for the backup with the following code?
Many thanks again for your continouus replies!