I’m using a customised board and I have connected a USB Hub TUSB8041 that is not recognised by the system with the follow DMESG. Someone have similar problem? Best Regards Gabriel usb 1-3: new full-speed USB device number 5 using tegra-x usb [ 5.266635] usb 1-3: device descriptor read/64, error …

In my case I found the error in my board. Was a problem with 1 pin in the TUSB8041. But is working only as usb 2.0. I think the problem to recognise usb 3.0 is the lane trace. We are fixing it and manufacturing the PCB to solve it.

USB Hub TUSB8041 4-Port Hub not recognised

Robotics & Edge Computing Jetson & Embedded Systems Jetson Nano

WayneWWW January 26, 2021, 2:36am 3

Please check if you need to do SI tuning.

Topic		Replies	Views
TX2 Custom Board USB Problem Jetson TX2	11	2869	October 18, 2021
Enabling USB 3.0 on different port - TK1 Jetson TK1	4	1118	March 9, 2015
jetson tk1 and usb issues Jetson TK1	6	2986	December 6, 2014
USB 3.0 hub not work on TX2 Jetson TX2	23	6134	October 18, 2021
On board USB Hub can not be detected Jetson Nano usb , board-design	19	4663	October 15, 2021
Jetson Tk1 - USB Webcam Logitech C310 is working via HUB Jetson TK1	1	3089	June 16, 2014
I have some problems with the USB_HUB Jetson Nano usb , board-design	10	2207	October 15, 2021
USB Issues with L4T 24.1 Jetson TX1	19	3691	July 25, 2016
[USB3.0] Our customer board usb3.0 doesn't work Jetson TX2	3	682	October 18, 2021
TX1 devkit, Jetpack 3.1 (R28.1): no USB3 connection on USB3 port Jetson TX1	13	915	August 31, 2018

USB Hub TUSB8041 4-Port Hub not recognised

Related topics