USB stick failing at startup

[DaveYYY]

Hi,

you can try with a USB hub that only supports USB 2.0; otherwise, I don’t think it’s possible without changes in device trees.

How to change USB 3.0 to USB 2.0 just by changing kernel source? (TX2)

Hi, In general, you need USB2 and USB3 pins to form a USB3 type-A port. You can disable USB3 in device tree. Take this post for example: usb2-1 and usb3-1 are paired to be USB3 type-A port. To run USB2 only, you can set usb3-1 status = "disabled";