Hi all, when trying to use the initrd flash method (e.g. for use with the new mass-flash method introduced in JP5) for flashing a Jetson Xavier NX on our own carrier board implementation, we run into the issue that the host system is waiting infinitely on booting up the target boards. While readin…

Hi, To make it more easier to understand, initrd flash needs the usb can work fine in device mode and that needs to be done by device tree. Which means initrd flash will depend on correct device tree content. But flash.sh does not. You don’t need to make it in “OTG mode”. You just need to make sur…

Which pin to use for ID on Micro B connector for initrd massflashing?

Robotics & Edge Computing Jetson & Embedded Systems Jetson Xavier NX

Trumany June 13, 2023, 1:41am 3

Hi, here is an example for the ID pin design: USB 2.0 Functionality - #15 by arvindprksh

Topic		Replies	Views
Flashing to multiple target devices and cloning Jetson Orin NX clone	8	52	January 16, 2025
Use alternate DTB for initrd flash Jetson AGX Orin reflash , kernel	8	1005	March 21, 2023
Flash with initrd issue Jetson Xavier NX board-design , flash	13	485	January 30, 2024
Can l4t_initrd_flash.sh flash the external device without network usb0? Jetson AGX Orin reflash	23	80	July 25, 2024
TX2 connectivity and USB 3.0 OTG Jetson TX2	9	2072	October 18, 2021
Orin NX USB issue Jetson Orin NX board-design	25	3500	March 7, 2023
Jetson Xavier NX stuck in Timeout and then exited while flashing with disk encryption enabled with R35.4.1 BSP Jetson Xavier NX boot , security , nvbugs , flash	14	981	October 25, 2023
Passing Board ID, version, sku and revision details to flash script Jetson AGX Orin reflash , board-design	4	750	January 29, 2024
jetson tx2 usb otg cannot find any device on my customized carrier board Jetson TX2	10	1092	January 28, 2020
Failed to flash using initrd when adding the --flash-only option Jetson Orin Nano boot , reflash	17	71	December 11, 2024

Which pin to use for ID on Micro B connector for initrd massflashing?

Related topics