About storage device support for JetPack 6.0

Robotics & Edge Computing Jetson & Embedded Systems Jetson AGX Orin
1

Hi Sir,

I try JetPack 6.0 to flash the Jetson AGX Orin platform. But there is no SD card option in storage device. Why ?

storage_device.PNG
storage_device.PNG625×513 42.1 KB

But in L4T r36.4.3, the flash.sh could support SD card flashing:

# ./flash.sh <target_board> internal			- boot <target_board> from on-board device (eMMC/SDCARD)
# ./flash.sh <target_board> external			- boot <target_board> from external device
# ./flash.sh <target_board> mmcblk0p1			- boot <target_board> from eMMC
# ./flash.sh <target_board> mmcblk1p1			- boot <target_board> from SDCARD
# ./flash.sh <target_board> sda1			- boot <target_board> from USB device
# ./flash.sh <target_board> nvme0n1			- boot <target_board> from NVME storage device
# ./flash.sh -N <IPaddr>:/nfsroot <target_board> eth0	- boot <target_board> from NFS
# ./flash.sh -k LNX <target_board> mmcblk1p1		- update <target_board> kernel
# ./flash.sh -k EBT <target_board> mmcblk1p1		- update <target_board> bootloader
3

Hi,

Please use below developer guide recommended commands:

Jetson AGX Orin Developer Kit (SD card):

$ sudo ./tools/kernel_flash/l4t_initrd_flash.sh --external-device mmcblk0p1 \
  -c tools/kernel_flash/flash_l4t_t234_nvme.xml \
  --showlogs --network usb0 jetson-agx-orin-devkit external
5

This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.