Dear Sir, We know Nvidia changed the eMMC vendor for TX1. If it is Sandisk, it needs to use the L4T version above R28.2. (PCN205040-Jetson_TX1_Multiple_Changes9.pdf) (This is why we need to upgrade from L4T R24.2.1 to R28.2) We use this command to read eMMC ID. cd /sys/block/mmcblk0/device && g…

Hi DaneLLL, Can I say that the eMMC ID 0x45 is also Sandisk? Thanks. S.K.

About TX1 eMMC ID

DaneLLL December 6, 2019, 7:11am 2

Hi,
Please check
https://lore.kernel.org/patchwork/patch/498202/
It looks to be a race condition in K4.4.