Arducam Multiplexer with jetson nano

abdelrahman.rezk · February 11, 2020, 3:55pm

I have Multi camera Adapters for Jetson Nano and the code mentioned in this link https://www.arducam.com/docs/camera-for-jetson-nano/multicamera-adapters-for-jetson-nano/ runs successfully, but when I try to get the cameras working with opencv to create video capture I get no results, does any one managed to get inputs from the cameras through this Adapters if yes what is the gstreamer pipeline should I use ?

ShaneCCC · February 12, 2020, 3:02am

Have a reference to below link

gist.github.com

https://gist.github.com/jkjung-avt/86b60a7723b97da19f7bfa3cb7d2690e

tegra-cam.py

# --------------------------------------------------------
# Camera sample code for Tegra X2/X1
#
# This program could capture and display video from
# IP CAM, USB webcam, or the Tegra onboard camera.
# Refer to the following blog post for how to set up
# and run the code:
#   https://jkjung-avt.github.io/tx2-camera-with-python/
#
# Written by JK Jung <jkjung13@gmail.com>

This file has been truncated. show original

abdelrahman.rezk · February 12, 2020, 10:48am

@ShaneCCC This fixed my issue, Thank you