Continuing the discussion from JetPack 4.5 Production Release with L4T 32.5 :

[image] ssvemail1987: without installing the kernel and dtb from Arducam hello ssvemail1987, since you’d apply the patch (kernel/dtb) from Arducam, that’s Arducam to maintain the kernel sources. those kernel changes may include to JP-4.6 only if Arducam share the kernel changes and submit t…

If i boot from sd card all work and camera too. So arducam image and fdt working…

Hi, There are few things I would like to suggest For the boot from usb drive, I would suggest you can use the method from our official document. https://docs.nvidia.com/jetson/l4t/index.html#page/Tegra%20Linux%20Driver%20Package%20Development%20Guide/flashing.html#wwpID0E02L0HA However, even…

[20210203_104047] [20210203_104306] Uploading: 20210203_104047.jpg…

Can it work with the same options with sd if there is no kernel? Which file should I look at and what size should it be? I’m confused.

Hi sir, Another suggestion for you… if you want to upload a picture, please add some explanation to it… I really don’t get what you want to say here. Especially you post a baby Yoda image in the second one… which seems not related to this issue… And what I said “please check if the kernel file i…

Flashing to a USB Drive Applies to: Jetson Xavier NX, Jetson Nano devices, Jetson AGX Xavier series, and Jetson TX1 only Jetson Xavier NX, Jetson Nano devices, Jetson AGX Xavier series, and Jetson TX1 can be booted from a USB device with mass storage class and bulk only protocol, such as a flash dr…

Put the Jetson device into recovery mode - how to do this?

Please start from quick start guide. You should learn it step by step. Also need to get familiar with sdkmanager. [image] Jetson Download Center

Image existing, and it working from sd card.

Boot from USB SSD after adding FDT /boot/arducam/tegra210-p3448-0000-p3449-0000-b00-imx477.dtb in extlinux.conf

Robotics & Edge Computing Jetson Systems Jetson Nano

ssvemail1987 February 3, 2021, 8:43am 27

Should we expect the integration of the imx477 driver into JP4.6?

Topic		Replies	Views
bootfromUSB not working after install Arducam driver Jetson Nano camera , boot , usb	50	2342	December 20, 2021
JetPack 4.5 Production Release with L4T 32.5 Jetson Nano	116	14205	June 8, 2021
How to boot from usb Jetson Nano	11	6074	August 23, 2019
Another boot from ssd + spi thread Jetson Nano spi , boot	23	2742	December 30, 2021
What version of jetpack has the feature "Kernel Boot Sequence " ?only jetpack4.5? how can we make a usb disk image with an easy way? Jetson Nano boot	55	3333	July 21, 2021
How to recover a broken Jetson Nano installation Jetson Nano reflash	13	2391	July 11, 2022
Jetson Nano 4GB booting but black screen appears Jetson Nano boot	8	2760	December 16, 2021
How to Boot from USB Drive? Jetson AGX Xavier boot , usb	49	10456	April 29, 2021
Move OS to USB SSD Jetson Nano boot	44	3979	July 2, 2021
The Jetson nano 2GB cannot start Jetson Nano boot , usb , nano2gb	10	1449	September 1, 2021

Boot from USB SSD after adding FDT /boot/arducam/tegra210-p3448-0000-p3449-0000-b00-imx477.dtb in extlinux.conf

Related topics