we are designing our own Carrier board for Jetson Orin NX. NVIDIA EVK includes EFM8SB10F2G for Power Button functionality in P3768_A04 reference schematic. Could we get firmware?
And the USB 3.2 hub design uses a Realtek RTS5420 device. The hub circuit includes a SPI FLASH
device which holds configuration information. Could we get Flash image also?
Hi chunho.cho,
Do you have Orin Nano devkit(p3768) for development?
I think all the necessary firmware and configuration files are included in BSP package.
You could download that through SDKM or R35.3.1 release page.
You could also refer to the following instruction to develop a custom board for OrinNX/Nano.
Jetson Orin NX and Nano Series - Jetson Orin NX and Nano Series
Dear KevinFFF
Yes we are designing orin nx carrier board with P3768-A04 schematic.
I could not find requested firmware and spi flash image above linked sites.
Could you recheck again?
What I mean is that all the necessary firmware and configurations file would be included in Driver Package (BSP).
Please get a Orin Nano p3768 devkit and put your Orin NX module on it and flash with latest R35.3.1 to boot up the board first.
Dear KevinFFF
Thanks for your quick answer!
I find button mcu firmware as like below link.
Does the firmware work well for the button mcu on the P3768-A04 Orin NX carrier board schematic?
And the USB 3.2 hub design uses a Realtek RTS5420 device. The hub circuit includes a SPI FLASH
device which holds configuration information.
Could we get SPI Flash image for usb hub ic as like above mcu firmware?
It should work if your custom board design is similar as the devkit.
Sorry, please get the firmware from Realtek and the related usages.
This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.