Hello, I am trying to train my own object detection model : https://github.com/dusty-nv/jetson-inference/blob/master/docs/pytorch-collect.md and trying to collect own dataset. When I run camera-capture, I get the following error: bash: camera-capture: command not found PATH: /jetson-inference/…

Hi @arjunTX2 , please run sudo apt-get install qtbase5-dev first. The camera-capture app will then be built. Normally this happens when you choose to install PyTorch during the cmake step. Also, if you deleted the camera-capture dir from your local copy of the repo, you probably want to start fr…

But what jetson module you are using (Nano, TX2, etc.)? Also, what camera model do you have? Initially, those sample tutorials where done with a specific camera described in the link below. Do you have the same model? https://github.com/dusty-nv/jetson-inference/blob/master/docs/imagenet-camera-2…

Hi, I am using Jetson TX2 which has on board MIPI CSI camera and running camera-capture without any argument uses on-board camera as described in this tutorial.

It is working now pretty well. Thanks :)

Hi, I cannot load the “camera-capture” tool. I tried several locations (see the list below). I get the following error each time: bash: camera-capture: command not found Locations tried: ahalim@Xavier:~/jetson-inference/build/tools/camera-capture$ camera-capture ahalim@Xavier:~/jetson-inferen…

[image] halimatif: After “make” I tried running from the following location again but to no avail: Hi @halimatif , try running the following commands: $ cd jetson-inference/build $ cmake ../ $ make I think it should then build the tool for you (to jetson-inference/build/aarch64/bin)

Hi, I tried your recommendation but it did not work for me. Below I have listed all output. Bold lines are my commands. In the output, I did note the following: – detecting Python 3.7… – Python 3.7 wasn’t found I have Python 3.6.9 installed. Now the actual output: ahalim@Xavier:~$ cd jetson…

Hi @ahalim, it built camera-capture, you just need to run it as ./camera-capture when you are in the same dir. Otherwise you can do a sudo make install and then run it without the leading ./

Thank you so much. I am sure this will work. Unfortunately my xavier does not want to reboot any more. Earlier today the system prompted me to install an available update. I opted to update. Now, on restart I just see a blank screen with a small cursor blinking on the top left corner of the scr…

[image] halimatif: Unfortunately my xavier does not want to reboot any more. Earlier today the system prompted me to install an available update. I opted to update. Now, on restart I just see a blank screen with a small cursor blinking on the top left corner of the screen. I now have to resolve …

Camera-capture command no found

Robotics & Edge Computing Jetson Systems Jetson TX2

dusty_nv May 26, 2020, 6:36pm 7

Hi @arjunTX2, lets move over to your other post for discussion about torchvision: Torchvision not found - Jetson Inference

Topic		Replies	Views
Capture-camera does not work Jetson Nano	25	2772	October 14, 2021
camera demos seem to fail due to not finding imports? Jetson Nano	14	1239	September 23, 2019
Imagenet-camera.cpp libraries not working on jetson nano Jetson Nano	40	4886	October 14, 2021
Hello AI World - now supports Python and onboard training with PyTorch! Jetson TX2	13	1974	April 30, 2020
Could not find camera-capture tool in Jetson Nano... Jetson Nano	3	1501	October 18, 2021
Error in Setting Up Hello AI World - Jetson Inference Jetson TX1 jetson-inference	4	669	October 18, 2021
Error following 2 day demo at "Compiling the project" on TX2 Jetson TX2	7	621	October 18, 2021
Cmake Error Two Days to a Demo Jetson TX2	3	1174	October 18, 2021
Unable to run jetson-inference::detectnet-camera Jetson TX1	5	1259	October 18, 2021
OpenCV Not Installed? Jetson TX1 opencv	26	2895	October 18, 2021

Camera-capture command no found

Related topics