CSI Camera - Jetson Nano B01 - JetPack 4.4

Robotics & Edge Computing Jetson Systems Jetson Nano
1

Dears,

I am trying to open Camera CSI port, but it did not succeed! It keeps showing errors as not exists or something like this. However, all connected well. When I use USB Cam, it works well. However, CSI did not work.

CAMERA.PNG
CAMERA.PNG1559×822 394 KB

===== NVMEDIA: NVENC =====
NvMMLiteBlockCreate : Block : BlockType = 4
H264: Profile = 66, Level = 40
Got EOS from element “pipeline0”.
Execution ended after 0:00:29.064987545
Setting pipeline to PAUSED …
Setting pipeline to READY …
Setting pipeline to NULL …
Freeing pipeline …

3

hello atefshkokani2009,

USB camera use generic protocol, hence you’re able to stream it normally.
however, you’ll need to have implementation for those two CSI sensor drivers.
please stick with the same discussion thread, Topic 139597.
thanks

4

did not succeed