We have developed a custom carrier board for the Jetson Nano. We have found that some times first thing in the morning, the nano hangs up at the boot logo. When u-boot starts I get random characters from the UART. Below is a part of the UART output. SoC: tegra210 Model: NVIDIA Jetson Nano Develope…

Found the issue. We had not added a pull-up resistor to the debug UART Rx line. so under certain circumstances random data would be received by the nano causing issues at the u-boot menu.

Custom carrier board periodicity fails to boot

Robotics & Edge Computing Jetson & Embedded Systems Jetson Nano

danielo95ok July 14, 2021, 5:34am 4

It is a nano issue. My stuff up

Some production modules do not work on custom carriers

Topic		Replies	Views
Custom Carrier Board: Jetson does not boot Jetson Nano boot , board-design	8	1046	October 22, 2022
Jetson Nano on custom carrier board stuck at nvidia logo Jetson Nano boot , board-design	28	1792	October 15, 2021
Jetson Nano production module does not boot on custom carrier board, but does so on auvidea's Jetson Nano boot , board-design	43	4690	November 24, 2021
Custom carrier board startup failed Jetson Nano	11	800	October 14, 2021
Jetson Nano boot sequence is stuck on uboot Jetson Nano boot	8	1443	October 18, 2021
Custom carrier board startup failed Jetson Nano	2	493	October 18, 2021
Reliability issue while booting Jetson Nano SOM ( taken out from JetsonNano developerkit ) with our custom carrier board GPU - Hardware hw , kernel , board-design	2	725	December 4, 2021
Jetson nano boot troubleshooting Jetson Nano boot , nano2gb	8	1479	September 5, 2021
Custom carrier board for Jetson Nano doesn't boot up (MOD_SLEEP still low) Jetson Nano boot , board-design	3	692	December 1, 2021
Jetson Nano Unable to Wake on Custom Carrier Board Jetson Nano boot , board-design	10	1162	October 15, 2021

Custom carrier board periodicity fails to boot

Related topics