Here is a good blog post testing Mellanox adapters in OpenStack environment.
Buried Lede: Driving a 100 Gigabit Network with OpenStack Buried Lede: Driving a 100 Gigabit Network with OpenStack
Here is a good blog post testing Mellanox adapters in OpenStack environment.
Buried Lede: Driving a 100 Gigabit Network with OpenStack Buried Lede: Driving a 100 Gigabit Network with OpenStack
Topic | Replies | Views | Activity | |
---|---|---|---|---|
connecting a new external / public network to mirantis / fuel openstack
|
3 | 164 | December 14, 2015 | |
OpenStack Neutron Mellanox ML2 Driver Configuration in Bright | 0 | 342 | October 18, 2014 | |
Infiniband Support for Canonical Charmed OpenStack Validation | 0 | 8 | September 9, 2025 | |
The speed and bandwidth of 200g mellanox network card(card Model:CX6141105A ConnextX-6 200GbE) are less than 200g | 2 | 2842 | November 25, 2021 | |
Mellanox ConnectX-3 PRO ETH Driver MLNX_OFED_LINUX-5.0-2.1.8.0-ubuntu20.04-x86_64 does not allow Openstack Victoria VM DHCP after install the driver. | 1 | 530 | April 15, 2021 | |
Ethernet connection on 1000BASE-T1 is not working on some LAN cables | 12 | 1306 | July 26, 2023 | |
How to use 10 Gb ethernet port on DrivePX2 AutoChaffeur | 1 | 843 | September 17, 2018 | |
mlx5 with inbox driver 100G is not detecting | 6 | 460 | October 12, 2017 | |
How push full 100gbps port? | 7 | 3894 | May 3, 2024 | |
Enable 1Gbps Ethernet speed on Jetson TX1 | 9 | 2465 | October 18, 2021 |