I re-compiled and flashed dtbs to my xavier board several times(because I have to test my dtb is ok or not) ok via command “sudo ./flash.sh -k kernel-dtb jetson-xavier-nx-devkit mmcblk0p1”. But, after some times(more than thirty times), it could not work now, and blocking with a log “tegrarcm_v2 --…

Flash blocking at "tegrarcm_v2 --isapplet"

Robotics & Edge Computing Jetson & Embedded Systems Jetson Xavier NX

mike_nv November 25, 2020, 1:11pm 7

When you said: “But, after some times(more than thirty times), it could not work now”.

Does it mean it worked before? If not, please go over the carrier board bring up checklists below and make sure you verified everything prior to bringing it up.

Hardware Bring-up Checklist
Software Bring-up Checklist

Topic		Replies	Views
CPU Bootloader is not running on device Jetson Xavier NX reflash	16	3205	October 18, 2021
Flashing issue in TX2 Jetson TX2 reflash	19	733	October 18, 2021
Xavier: Flashing hangs - tegrahost_v2 --chip 0x19 0 --partitionlayout flash.xml.bin --updatesig images_list_signed.xml Jetson AGX Xavier	2	1463	November 25, 2018
Xavier: Flash to SD card failed in Virtual Box Jetson AGX Xavier	4	453	October 18, 2021
Useing flash.sh to update DTB issue Jetson AGX Xavier	13	1314	October 18, 2021
Failed to flash customized kernel dtb Jetson Xavier NX reflash	4	852	October 18, 2021
Flash agx firmware Jetson AGX Xavier reflash	11	1612	October 18, 2021
Flash.sh kernel[_dtb] fails with return code 8 Jetson Xavier NX board-design , device-tree	5	945	October 19, 2022
TX2NX USB problem while flashing Jetson TX2 flash	4	39	January 10, 2025
Flashing Xavier NX Emmc Jetson Xavier NX reflash	14	3099	October 18, 2021

Flash blocking at "tegrarcm_v2 --isapplet"

Related topics