Hi @WayneWWW,
what is the procedure for RMA.
Could you kinldy point it out?
Here follows a summary of the tests that I have done:
| Date | Seconds | Hours | Model | Boot | Pwer Supply | PCIe error | What new |
|---|---|---|---|---|---|---|---|
| 22/08/20 | 75069 | 21 | A02 | SD | ATX, 5V, 15A | No | |
| 23/08/20 | 95304 | 26 | A02 | SD | ATX, 5V, 15A | No | |
| 24/08/20 | 33548 | 9 | A02 | SD | ATX, 5V, 15A | No | |
| 26/08/20 | 5533 | 2 | A02 | USB3.0 SSD | ATX, 5V, 15A | No | I have booted from USB3.0 SSD |
| 01/09/20 | 22163 | 6 | A02 | USB3.0 SSD | 5V, 4A | No | I changed power supply |
| 02/09/20 | 37080 | 10 | A02 | USB3.0 SSD | 5V, 4A | No | |
| 06/09/20 | 76130 | 21 | B01 | USB3.0 SSD | 5V, 4A | Yes | I bought a new board: B01 model |
| 07/09/20 | 25316 | 7 | B01 | USB3.0 SSD | 5V, 4A | Yes | Logged temperature 38-45°C |
| 08/09/20 | 5705 | 2 | B01 | USB3.0 SSD | 5V, 4A | Yes | |
| 09/09/20 | 44245 | 12 | B01 | SD | 5V, 4A | Yes | Virgin SD installation |
| 10/09/20 | 108365 | 30 | B01 | SD | 5V, 4A | Few | No inference running, NO CRASH |
| 11/09/20 | 31998 | 9 | A02 | SD | 5V, 4A | No | Virgin SD installation |
| 12/09/20 | 19152 | 5 | A02 | SD | 5V, 4A | No | Big Fan 230V |
| 14/09/20 | 96681 | 27 | A02 | SD | 5V, 4A | No | No OSD in deepstream pipeline |
| 15/09/20 | Running | Running | A02 | SD | 5V, 4A | No | Only PGIE in deepstream pipeline, after 14 hours I run jetson_clocks |
You can see the hours for every test that I have run.
Now I am waiting to see what happens in this last test.
I will keep you updated.
Thanks